lock: log errors on cleanup, improve

Signed-off-by: Tobias Ulmer <tu@emlix.com>

err: add tostring() method

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib: don't close debuglogfile early, improve performance

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2build: check for chroot removal, add error message for common issue

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2build: clarify creation of directories

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2build: ouch, repair error handling in helper_chroot_remove()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Improve robustness of signal handling

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib: don't call chdir in rmtempdirs

Signed-off-by: Tobias Ulmer <tu@emlix.com>

eio: luaL_argerror never returns, but it helps gcc warnings

Signed-off-by: Tobias Ulmer <tu@emlix.com>

console: set stderr to unbuffered

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2build: use result_build_set to skip build steps

Remove return_flags.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Introduce build_set and result_build_set.

A build set contains a result build sets for each result we want to
build. The result build set contains all configurable settings, modes,
etc. on a per result basis.
This change disentangles all build specific parameters from the static
project configuration.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

result: split build_config() into builtin_env()

Builtin env requires a BuildID, which in turn requires a fully set up
result with build modes etc. just to figure out the temporary directory.

Thus it makes sense to split build_config() into two methods operations,
with only builtin_env() requiring full setup work.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2build: fix ldoc tag

Signed-off-by: Tobias Ulmer <tu@emlix.com>

err: fix ldoc tags

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2tool: remove unused print_selection and selected marker

Signed-off-by: Tobias Ulmer <tu@emlix.com>

move build mode and settings into the build process

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2tool: false is a valid value in settings

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2tool: remove select_results()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2build: clear up confusion between build mode and process mode

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib: make use of errcode in mkdir()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib: in mkdir() use same parse_mode argument

Signed-off-by: Tobias Ulmer <tu@emlix.com>

errno: register errno constants as errcodes

Signed-off-by: Tobias Ulmer <tu@emlix.com>

err: attach meaningful codes to error objects

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2project: introduce a class for the local project

Signed-off-by: Tobias Ulmer <tu@emlix.com>

err: improve documentation

Signed-off-by: Tobias Ulmer <tu@emlix.com>

le2lib: return error if fflush before fork fails

Signed-off-by: Tobias Ulmer <tu@emlix.com>

cache: export file_in_cache()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

generic_git: allow passing workdir to git()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Add optional sudo support to e2factory

Once sudo is enable, e2-su-2.2 suid permissions can be removed and set
to 755.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

create next changelog entry

Signed-off-by: Tobias Ulmer <tu@emlix.com>

release e2factory-2.3.17p0

Signed-off-by: Tobias Ulmer <tu@emlix.com>

update changelog

Signed-off-by: Tobias Ulmer <tu@emlix.com>

git: wait for pipe children in any order

Signed-off-by: Tobias Ulmer <tu@emlix.com>

tools: extend for enable

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2-build: allow --wc-mode foo,bar and add warning

When specifying multiple build modes, warn if there is a default
selected result. It may or may not be what you want.

Add field splitting to build-mode options, currently , and whitespace
are supported.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

generic_git: fix error handling

found by Anton Hillebrand <ahille@emlix.com>

Signed-off-by: Tobias Ulmer <tu@emlix.com>

err: stop evaluation of debug.traceback() every time

Signed-off-by: Tobias Ulmer <tu@emlix.com>

le2lib: remove do_parse_mode()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Moved parse_mode code from c to lua.

Signed-off-by: Anton Hillebrand <ahille@emlix.com>

transport: remove duplicate comment and rmtempfile call

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib: implement rename(), use in rotate_log()

This makes it independent of the "mv" command, allowing to open and
rotate the log file before the tools module is initialized.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

le2lib: add implementation of rename(2)

Signed-off-by: Tobias Ulmer <tu@emlix.com>

digest: allow writing SHA256 digests

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2-build: check for duplicate results in build mode arguments

Signed-off-by: Tobias Ulmer <tu@emlix.com>

add buildid logging to help with debugging

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib: fix e2lib.wait() for signaled process

wait() returned 0 for a signaled process, expecting the caller to
check the third argument for a signal code.

Most call sites do not observe the signal argument, leading to
"successful" execution of a crashing process.

wait() will now return the exit code or signal + 128 in the first
argument. This is in line with various shells.

Also improve debug logging around wait() and callcmd().

Signed-off-by: Tobias Ulmer <tu@emlix.com>

create next changelog entry

Signed-off-by: Tobias Ulmer <tu@emlix.com>

release e2factory-2.3.17

Signed-off-by: Tobias Ulmer <tu@emlix.com>

correct LDoc comments

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2-build: allow a mix of result build modi on the command line

Signed-off-by: Tobias Ulmer <tu@emlix.com>

move less interesting messages to log level 4

Signed-off-by: Tobias Ulmer <tu@emlix.com>

remove set_licences()/get_licences()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

files: fix sub-licences default assignment

During the initialization of file entries, new licences were added to
the "outer" file licences list.

This lead to file entries without a licences list getting additional
licence entries that shouldn't have been there.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

source: add licences() method just like file_class

Saves a lot of string list copying that's better done in an explicit
fashion.  get_licences()/set_licences() stay until all extensions are
updated.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

ls-project: add --unused option

Shows all unused results, sources, licences and chroot groups,
respecting result selection on the command line.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

ls-project: add LDoc comment

Signed-off-by: Tobias Ulmer <tu@emlix.com>

ls-project: long comment markers confuse LDoc, fix

Signed-off-by: Tobias Ulmer <tu@emlix.com>

result: log if result has no chroot groups

Signed-off-by: Tobias Ulmer <tu@emlix.com>

chroot: remove the default_groups minimum limit

Signed-off-by: Tobias Ulmer <tu@emlix.com>

ls-project: only show chroot groups for listed results

Signed-off-by: Tobias Ulmer <tu@emlix.com>

licence: remove empty loop missed in the file class conversion

Signed-off-by: Tobias Ulmer <tu@emlix.com>

licence: remove now unused licences_sorted vector

Signed-off-by: Tobias Ulmer <tu@emlix.com>

ls-project: only show licences for listed sources

--all continues to show all licences, including unused ones

Signed-off-by: Tobias Ulmer <tu@emlix.com>

document cvs source type for completeness

Signed-off-by: Tobias Ulmer <tu@emlix.com>

licencesrc: document the licence source

Signed-off-by: Tobias Ulmer <tu@emlix.com>

licencesrc: add new source type providing licence info to build

Signed-off-by: Tobias Ulmer <tu@emlix.com>

source: make sourceset argument non-optional, add to display()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

files: make sure sourceset is always set

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib.ssh_remote_cmd: use callcmd_stdout_stderr()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2lib: add callcmd_stdout_stderr() taking two callbacks

Signed-off-by: Tobias Ulmer <tu@emlix.com>

url: behave like documented and don't remove port from u.server

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2tool: add resultname error checking to dlist_recursive()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2option: log the result of parse()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2option: make default for option flags functional

Signed-off-by: Tobias Ulmer <tu@emlix.com>

policy: make sure --build-mode=release also sets --release shortcut

Signed-off-by: Tobias Ulmer <tu@emlix.com>

generic_git: remove mostly unused sourceset2ref() helper

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2-build: --force-rebuild isn't broken

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Remove deprecated lazytag build mode

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Remove scm module

Signed-off-by: Tobias Ulmer <tu@emlix.com>

plugins: remove scm remains, register to_result to collect_project plugin

Signed-off-by: Tobias Ulmer <tu@emlix.com>

plugin: on init_plugins() error, disable exit_plugins()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

collect_project: switch from scm to source_to_result_fn()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

collect_project: add static method for adding src to cp-result functions

Signed-off-by: Tobias Ulmer <tu@emlix.com>

result: add function to iterate over result classes

Signed-off-by: Tobias Ulmer <tu@emlix.com>

git: remove git_commit_id() scm interface

Signed-off-by: Tobias Ulmer <tu@emlix.com>

git: move git_commit_id() into git_source

Signed-off-by: Tobias Ulmer <tu@emlix.com>

scm no longer required

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Expand and remove generic_source_check()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

scm: remove generic_source_check()

Signed-off-by: Tobias Ulmer <tu@emlix.com>

source: separate

Signed-off-by: Tobias Ulmer <tu@emlix.com>

gitrepo: use absolute working directory

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Move fetch/update/prepare from scm to source classes

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Use basic_source class interface and drop scm

Signed-off-by: Tobias Ulmer <tu@emlix.com>

scm: remove fetch/update/prepare source from scm

Signed-off-by: Tobias Ulmer <tu@emlix.com>

source: add fetch/update/prepare source to basic_source class

Signed-off-by: Tobias Ulmer <tu@emlix.com>

cvs: fix undeclared variable access when cvsroot unset

Signed-off-by: Tobias Ulmer <tu@emlix.com>

Remove info table throughout factory, only small pieces remain.

Signed-off-by: Tobias Ulmer <tu@emlix.com>

cache: remove info.cache

Signed-off-by: Tobias Ulmer <tu@emlix.com>

e2tool: improve syntax and global version checks

Signed-off-by: Tobias Ulmer <tu@emlix.com>